Sanyo POA-PN02C PDAs & Smartphones User Manual


 
44
Chapter 4 Controlling the Projector
Controls
Click Control on the main menu. The setting method differs depending
on the contents of the page. Click on the page number to change pages
and select desired setting items.
Please see the owner's manual of the projector to have the further information
of each control item.
The control page displays valid control items depending on the selected input mode, signal
or functions of the projector you use, therefore, there may be different controls between the
described items and actual control items on the page display. For further information , refer to the
projector's owner's manual.
When the projector is in standby, only the timer on the setting menu is effective; others are inactive.
Item Description
Input ......................... Selects input mode of the projector. (1 to 3)
Source ..................... Selects signal source of the input.
Input 1 : RGB(PC analog)
RGB(Scart)
RGB(PC digital)
RGB(AV HDCP)
Input 2 : Video
Y,Pb/Cb,Pr/Cr
RGB
Input 3 : Video
Y,Pb/Cb,Pr/Cr
S-video
Input
This function is to select the input mode and source mode of the projector. Click Set but-
ton after selecting the input and source mode.