Filter
Top Products
26
POWER FAILURE
When power is off, you will not be able to make or receive calls with the telephone.
After a power outage, it may take a few seconds for the handset to reconnect to the
base unit.
LCD SCREEN MESSAGES
The following indicators show the status of a message or of the phone.
BASE PAGING
Someone has pressed
PAGE on the base unit
BUSY The dialed number or handset is busy
CALL ALL An intercom call has been placed to all
registered handsets
CALL BACK A forwarded call was not answered
CHARGING Battery is charging
CONFERENCE CALL 2 handsets are on a conference call
ENDED The call has ended. The elapsed time for the
call also shows.
EXT IN USE Another handset is already on an external call
EXTERNAL CALL A call was received with no Caller ID
information provided
FAIL Registration did not occur
H A call has been placed on hold
INTERNAL CALL
HANDSET # / HANDSET NAME
An intercom call has been placed from the
displayed handset
MIC MUTE The handset is in mute mode
PRIVATE # / NAME / CALLER Some or all of the Caller ID information was
blocked
READY Phone is charged and ready to make or receive
calls
TALK Phone is in Talk mode (ready to place a call or
on a call). If on a call, the duration of the call
also shows