Filter
Top Products
21
appears as 1-416-222-5555, but it is not a long distance number, press
REDIAL/PAUSE key until it shows 416-222-5555 (without 1).
DIRECTORY
The REDIAL/PAUSE key lets you select how many digits of the number are displayed:
7 7-digit telephone number.
10 3-digit area code + 7-digit telephone number.
11 Long distance code 1 + 3-digit area code + 7-digit telephone number.
1. Press
in standby mode to enter call log quickly.
2. Press
or to select desired Caller ID entry.
3. Press
REDIAL/PAUSE to rearrange the format of the number displayed.
4. Press
MENU/OK, “STORE NUMBER” will appear.
5. Edit the number if necessary.
6. Press
MENU/OK to edit the name, “STORE NAME” will appear.
7. Edit the name if necessary.
8. Press
MENU/OK to confirm the change.
Result: A beep will sound to confirm the changes.
MULTI-HANDSET CONFIGURATION
Registering a handset
The original handsets provided are automatically registered the first time you set up
the telephone. You may need to register handsets under the following if you are
replacing a faulty handset. (See the
Troubleshooting section on page 29 if you are
experiencing problems with the handset).
Note: If you register a handset to more than one base, you will need to rename
the handset for that base. Otherwise, the base will recognize it as “Handset 1”.
To register handset:
1. Press the MENU/OK key.
2. Press
or to select “REGISTER”, then press MENU/OK to confirm.
3. When the handset display shows “PLEASE WAIT”, press and hold
PAGE on the
base until IN USE LED (red) flashes fast.
4. If the registration is successful “SUCCESS” will show on the handset display.
Note: If the registration is unsuccessful “FAIL” will show on the handset display. In
this case, you should try again.
Identifying a handset on the network
You can identify each handset by assigning a name to it. Please see the Handset
Name Setting
section on page 11 for more information.
Intercom (internal) call