Filter
Top Products
11
INITIAL PROGRAMMING
Before using this telephone, the following initial settings must be completed: volume
level, ring volume, ring tone, auto answer, key tone, key lock, handset name,
language, phone book, call log, message waiting, and dial mode. The last 4 settings
are stored on the base unit and control all handsets. The other settings must be set
for each handset individually.
Language
1. Press MENU/OK to enter the options menu.
2. Scroll
or until you see “LANGUAGE.”
3. Press
MENU/OK to enter settings.
4. Press
or to select the desired language (English, Spanish, or French). The
default is English.
5. Press
MENU/OK to confirm.
Handset name
You can use up to 16 characters to name a handset, the name will appear on the
handset display screen in standby mode. To name your handset:
1. Press the
MENU/OK key.
2. Press
or to select “HANDSET NAME”.
3. Press
MENU/OK to begin settings, “NAME” will appear.
4. Enter a name for your handset.
Note: refer to Storing a name / number in the directory section for details
about how to input characters on page 18.
5. Press
MENU/OK to save the name.
Dial mode
This phone is compatible with pulse-dialing (rotary) and tone-dialing (DTMF) systems.
If you have a touch-tone service, do nothing as your phone has been set to touch-
tone by default prior to shipment. If you do not know which type of service you have,
contact your local telephone company. The default setting is DTMF.
1. Press the
MENU/OK key.
2. Press
or to select “DIALING” from the options.
3. Press the
MENU/OK key.
4. Press
or to select “DIAL METHOD” from the submenu.
5. Press
MENU/OK.
6. Press
or to select “PULSE” or “DTMF” mode.
7. Press
MENU/OK to confirm your selection.
8. To return to standby mode, press
C repeatedly.