Filter
Top Products
34 Settings
Power Management
You can conserve battery power by adjusting the timeout settings for the display
and the keypad and display backlight or adjusting the display brightness. This
section also provides you with an additional indication of your current main battery
charge level.
Reviewing the Battery Charge Level
• From standby mode, press Start > More > More > Settings > Power
Management.
Changing the Backlight Time-Out
Select the length of time the display backlight stays on when you do not use the
device.
1. From standby mode, press Start > More > More > Settings > Power
Management > Backlight time out.
• Choose Never, 5 seconds, 10 seconds, 15 seconds, 30 seconds, or
60 seconds.
2. Press the navigation key left or right to select a new time out setting and
press Done (left softkey).
Note: Long backlight time-out settings reduce the battery’s talk and standby times.
Changing the Display Time-Out
Select the length of time the display stays on.
1. From standby mode, press Start > More > More > Settings > Power
Management > Display time out.
• During standby, the device goes into sleep mode after a specified
period of time to conserve power. Choose Never, 10 seconds, 15
seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, or 10
minutes.
2. Press the navigation key left or right to select a new time-out setting and
press Done (left softkey).
Changing the Brightness
Adjust your screen’s brightness to suit your surroundings.
1. From standby mode, press Start > More > More > Settings > Power
Management > Display brightness.
• Adjust the brightness level for the display. Choose Level 1 - Level 5.