Filter
Top Products
100 Bluetooth
To view your Bluetooth device address:
1. Press Start > More > More > Settings > Connections > Bluetooth
Profiles > My Information Setting.
2. Use either the thumbwheel or navigation key to scroll down the My
Information Manager page to review the Device Address Bluetooth uses
for your device.
Pairing Bluetooth Devices
Pairing Devices
The Bluetooth pairing process (bonding) allows you to establish trusted
connections between your device and another Bluetooth device. When devices are
paired, a passcode is shared between devices, allowing for fast, secure
connections while bypassing the discovery and authentication process.
Note: When pairing your device to other Bluetooth devices, ensure that your device
is not connected to your computer via a USB cable.
To pair your phone with another Bluetooth device:
1. Confirm that Bluetooth is enabled. (See "Turning Bluetooth On and Off"
on page 96.)
2. Press Start > More > More > Settings > Connections > Bluetooth.
3. Select Add new device.. and press . (Your device will display a list
of discovered in-range Bluetooth devices.)
4. Select a device and press Next (left softkey).
5. Use the keypad to enter a passcode and press Next (left softkey). (An
onscreen message will tell you if the connection was made successfully.
If the connection failed, please confirm the device is functioning
correctly and repeat steps 3 and 4.)
6. Use the keypad and to enter a display name for the Bluetooth
device and press Next (left softkey).
7. From the Services page, check the Hands Free box by highlighting the
option and pressing .
• If you are connecting to a Bluetooth-capable printer, you must check
the Printer box on the Services page.