Filter
Top Products
Messages
88
Delivery after: you can set the delay time before
the phone sends your messages.
Lea
ve a copy: allows you to copy the message that
you sent.
Address hiding
: when this option sets to On, your
phone number does not display on the recipients
phone.
Deliv
ery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
R
ead reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
M
essage reception: allows you to set how you
receive a message. You can select one of Manual,
Automatic and Reject.
Anon
ymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
Adv
erts reject: when this option sets to On, you
can reject advertisements by service provider.
R
eport allowed: when this option sets to On, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
Current profile
: allows you to select one profile to
use currently.
Profile setting
: allows you to set up to five profiles.
Messages
89
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
•GSM setting: allows you to change the proxy
settings for the GSM network.
- Gateway: enter the IP address and IP port.
- Data call type: select a network connection
type between ISDN and Analogue.
- Dial number: enter the server phone
number.
- Login ID: enter the server login ID.
- Password: enter the server password.
•GPRS setting: allows you to change the proxy
settings for the GPRS network.
- Gateway: enter the IP address and IP port.
- APN: enter the access point name used for
the address of the GPRS network gateway.
- Login ID: enter the user ID required to connect
to GPRS network.
- Password: enter the password required to
connect to the GPRS network.
• Bearer: select the bearer to be used for each type
of network accesses.
- GPRS only: it only works in GPRS network.
- GSM only: it only works in GSM network.