Filter
Top Products
• Press WAIT or TRANSFER.
• Remain off-hook until the person dials 56 from any phone.
• The paged person will be automatically connected with you.
CALL PARK AND PAGE
When you have an outside call for someone who is not at his/her desk, you can
park the call prior to paging. The OfficeServ 100, OfficeServ 500, and OfficeServ
7000 Series systems offer two different methods:
MANUAL PARK ORBITS
• While in conversation, press the PARK button.
• Entered a desired orbit number (0-9), if the orbit number is busy dial another
orbit number. Display users can press ✱ to automatically place the call in any
available orbit number and see the number in the display.
• Remember the selected orbit number.
• Replace the handset when finished.
• Lift the handset and make a page announcement as previously described
(example:“John Smith park two”).
To retrieve a parked call from orbit:
• Press the PARK button and dial the announced orbit number (0-9).
• You will be connected to the parked call.
NOTES:
1. You must have a PARK button or park access code to retrieve and place calls
in park orbits.
2. If the parked call is not retrieved within a pre-programmed period of time, it
will recall your keyset and have a slow flashing amber light.You cannot park
and page intercom calls.
3. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
AUTOMATIC PARK WITH PAGE BUTTON
• While in conversation,press the PAGE button.The call is automatically parked
at your station.
• Receive page tone and dial a desired page zone number.
• Make announcement indicating your extension number or the line number.
Hang up.
To retrieve an automatically parked call:
• Dial 10 plus the number that was announced. If you have a PAGPK button,
press it and dial the number that was announced. If you have a PARK button,
press it and dial the announced orbit number.
3736
PAGING AND MESSAGING
MAKING AN INTERNAL PAGE
To make an announcement through the keyset speakers in the idle condition:
• Lift the handset.
• Press the PAGE button or dial 55.
• Dial the desired zone number 0, 1, 2,3 or 4.
• After the attention tone, make your announcement.
NOTE: If you have a dedicated page zone button, it is not necessary to press PAGE
and dial a zone number.
MAKING AN EXTERNAL PAGE
To make an announcement through the external paging speakers:
• Lift the handset.
• Press the PAGE button or dial 55.
• Dial the desired zone number 5, 6, 7 or 8—OR—dial 9 to page all external
zones.
• After the attention tone, make your announcement.
NOTE: If you have a dedicated page zone button, it is not necessary to press PAGE
and dial a zone number.
ALL PAGE
To page all designated keysets in internal zone 0 and all external zones at the same
time:
• Lift the handset.
• Press the PAGE button or dial 55.
• Dial ✱ or press the ALL PAGE button.
• After the attention tone, make your announcement.
NOTE: The indicator on the PAGE button will be lit steady when an All Page is in
progress.
MEET ME PAGE
• Lift the handset.
• Press the Meet Me Page (MMPG) button or dial 54.
• Dial the desired zone number.
• After the attention tone, instruct the paged person to dial 56.
Home Page
Table of Contents
ITP-5112L