Ricoh Broadband. Digital TV. Phone. Telephone User Manual


 
36
Verify the HD channels are provisioned for your
account by calling TDS at 1-866-44-TDSTV.
No Sound
• Verify that the volume is turned up.
• Verify that the TV is not on MUTE.
• Turn the TV off and turn back on.
Verify that the audio cables are connected
properly, and to the proper input on the TV.
If your set-top box is connected through a
device (e.g., surround sound, stereo, VCR) make
sure the device is turned on and is set to the
correct input.
Unplug the power source to the set-top box
for 30 seconds. Then, plug it back in and wait
about 5 minutes for the set-top box to reboot.
Poor Sound Quality
Verify that the audio cables are connected
properly.
If the problem is voice sync and your set-top
box is connected via HDMI cables, unplug the
power source to the set-top box. If the problem
still persists, consider switching to component
video and stereo audio cables instead of HDMI.
Remote Control Not Working
Press the STB button on the remote to make
sure the correct device has been selected.
Check batteries to see if they need to be
replaced.
Verify that the set-top box, TV, and audio device