RCA RC940 Telephone User Manual


  Open as PDF
of 24
 
7
English
VOIP decoder box
1
2
3
FollowthesestepstousetheRC940withaVoIPservice.
NOTE: You must subscribe to a VoIP service with decoder box in order to
use the RC940 for an additional VoIP line. The RC940 will not work with
VoIP without a decoder box.
Installing the Base Unit
Installation for VoIP Service
1.Plugthebaseunitintoan
electrical outlet near your VoIP
decoderbox.Theindicator
light on the front of the base
turns red.
Important: The base and
extension units work best
when plugged directly into an
electrical outlet. Do not plug
them into a surge protector,
plug strip, or extension cord.
2.PlugoneendoftheprovidedtelephonecordintotheLINEjackonthe
rightsideofthebaseunit,andtheotherendintophoneoutputofthe
VoIPdecoderbox.Thebaseunit'sindicatorlightshouldturngreen.
3.PlugthephoneyouusewiththedecoderboxintothePHONEjackon
the side of the base unit.
Installing and Testing the Extension Unit
1.Plugtheextensionunitinto
an electrical outlet where
youwantanewVoIPjack.
The indicator light on the
extensionunitblinksred.As
soonastheextensionandbase
unitsrecognizeeachother,the
extensionunit'sindicatorlight
turns green.
1
2
2.Tomakesureyou'vecompletedtheinstallationsuccessfully,plug
ahandsetorcordlessphoneintothePHONE/DATAjackonthe
extensionunit.
Important: If your phone requires power to operate, don't forget to
plug its power adapter in! The extension unit provides the phone
signal to the connected phone, not power.
continues on next page...
 previous next