RCA RC940 Telephone User Manual


  Open as PDF
of 24
 
5
English
FollowthesestepstousetheRC940witharegularphone,fax/modem,
or satellite receiver.
NOTE: For installation with a VoIP service, see page 7.
Installing the Base Unit
Installation for Phone, Fax/Modem, & Satellite
1
2
3
1.Plugthebaseunitintoan
electrical outlet near an
existingwallphonejack.The
indicator light on the front of
the base turns red.
Important: The base and
extension units work best
when plugged directly into an
electrical outlet. Do not plug
them into a surge protector,
plug strip, or extension cord.
2.PlugoneendoftheprovidedtelephonecordintotheLINEjackon
therightsideofthebaseunit,andtheotherendintoanyexisting
wallphonejack.Thebaseunit'sindicatorlightshouldturngreen.
3.Ifyouwanttouseaphoneatthisjack,plugitintothePHONEjackon
the side of the base unit.
Installing and Testing the Extension Unit
1.Plugtheextensionunitintoan
electrical outlet where you want
anewphonejack.Theindicator
lightontheextensionunitblinks
red.Assoonastheextension
andbaseunitsrecognizeeach
other,theextensionunit's
indicator light turns green.
1
2
2.Tomakesureyou'vecompletedtheinstallationsuccessfully,plug
ahandsetorcordlessphoneintothePHONE/DATAjackonthe
extensionunit.
Important: If your phone requires power to operate, don't forget to
plug its power adapter in! The extension unit provides the phone
signal to the connected phone, not power.
continues on next page...
 previous next