Filter
Top Products
24
CHANGING THE BATTERY
NOTE: The RBRC seal on the battery used in your Thomson
Consumer Electronics product indicates that we are participating in a
program to collect and recycle Nickel Cadmium batteries throughout
the United States of America. Please call 1-800-8-BATTERY for
information or contact your local recycling center.
Ni-Cd
RBRC
RBRC
Make sure the phone is OFF before you
replace battery.
1. Remove the battery compartment door.
2. Disconnect the cord attached to the
battery pack and remove the battery pack
from the handset.
3. Insert the new battery pack and connect
the cord into the jack inside the handset.
4. Put the battery compartment door back on.
5. Place handset in the base to charge. If you
don’t charge the handset battery
properly (for 12 hours) when you first
set up the phone and/or when you
install a new battery pack, the battery’s
long-term performance will be
compromised.
BATTERY SAFETY PRECAUTIONS
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• To reduce the risk of fire or personal injury, use only the battery listed in
the User’s Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.