Filter
Top Products
24
Remote Password
You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access,
and it prevents unauthorized access to your answering system.
From the Answering System Menu:
1. Press the
VOL (- or +) button to scroll to the Remote Password.
2. Press SELECT soft key. The current Remote password shows in the
display. Default is 000.
3. Use the touch-tone pad to enter your 3-digit security code.
4. Press SELECT soft key to save the setting.
Restore Setting
The feature allows you to reset some menu settings to the original default
settings.
From the Answering System Menu:
1. Press
Menu button on handset or MENU soft key on the base.
2. Press the
VOL (- or +) button to scroll to Restore Setting.
3. Press SELECT soft key.
“LOAD TO DEFAULT?” displays on the screen.
4. Press YES soft key to let unit reset to default setting; once finished, the
unit will emit a short beep prompt, and “Saved” shows in the display.
5. If you do not want to reset, press the NO soft key.
Telephone Operation
Making Calls with the Cordless Handset
1. Press the Talk button, the unit will pick the first available line for you.
-OR-
Press Line 1 or Line 2 soft key to select a line you wanted.
2. Wait for a dial tone then dial the phone number.
3. Press the
End button when finished.
Making Calls in the Speakerphone mode (from the base)
1. Press the Speaker button (in base), the unit will pick the available line
for you. If both lines are available, Line 1 will be used first.
-OR-
Press
Line 1 or Line 2 button on the base to select the line, and the
base’s speaker will activate.
2. Wait for a dial tone then dial a phone number or press
One-Touch
button (1-10) to dial stored phone number.
3. Press the
Speaker button when finished.
NOTE: After pick the line, the call timer starts to run until all the calls are
hung up. The timer serves for both 2 lines.
Telephone Operation