Filter
Top Products
14
5. Place the handset in the base cradle. The charge indicator illuminates,
verifying the battery is charging.
6. Allow the phone to charge for 14 hours prior to first use. If you don’t
properly charge the phone, battery performance is compromised.
NOTE: If the model you bought is a RE2 version, there is one additional
charger. Plug the power supply cord into the power jack on the back of the
charger and the other end into an electrical outlet. Place handset in the
charger, the charge indicator illuminates, verifying the battery is charging.
CAUTION: To reduce risk of personal injury, fire, or damage
use only the 5-2828 (charger) power adaptor listed in the
user’s guide. This power adaptor is intended to be correctly
orientated in a vertical or floor mount position.
Programming the Phone
Standby Screen
The handset displays the handset name and number, date, time, and battery
status and the three soft keys.
The base displays the current date, time and the soft keys.
NOTE: The soft keys will change according to the status of the unit.
NOTE: The base LCD has a dedicated “SET CLOCK” icon flashing when the
clock is not set. Please go to menu “Phone Setting- Date /Time” to set the
clock.
Programming Functions
The system uses a menu structure to give you access to all of the built-
in features. You may program the following items in main menu: Phone
Setting, Display Setting, Sound Setting, Answering System and Restore
Setting.
NOTE: During programming, you may press the BACK Soft key (left) at any
time to exit the sub-menu and return to the main menu, or press Exit key to
exit programming and return to standby screen.
NOTE: If no key is pressed for 30 seconds, the handset will automatically exit
programming and return to standby screen.
Phone Setting
1. Make sure your phone is OFF (not in Talk mode).
2. Press the
Menu button on HS or the MENU soft key (left) on BS to go
to the main menu.
3. Press
VOL (- or +) button to scroll to Phone Setting.
4. Press SELECT soft key (right) to confirm and you may program the
following items:
Date/Time (base only),
Auto Answer (handset only),
Auto Answer Intercom (both base and handset),
Dial Mode (base only),
Programming the Telephone