Filter
Top Products
4-15
Operation with Full Function Handset
Note: A license is required to operate the radio on the private channels.
It is your responsibility to obtain the proper license to operate the radio
on these frequencies.
To select the Private Channel:
1. Press the FUNC key, followed by the 5/PRIV key. The assigned private
channel number appears in the large channel display, preceded by a
“P”. If multiple Private Channels are available, the first channel number
appears.
2. If multiple Private Channels are available, press the CH up/down keys
until the desired Private Channel number appears. The displayed Private
Channel number is selected.
or
Input the private channel number on the keypad. For 5 seconds the
channel number flashes on the LCD display. If the ENT key is pressed
during this flashing phase or the 5 seconds elapse without pressing
another key, the channel is changed. If the CLR key is pressed during
the flashing phase or the number you have selected is not valid, the
channel returns to the previous number.
If Private Channels are not enabled, attempting to access this secondary
function will result in an alarm tone.
The Private Channel is included in the list of channels being scanned
during Scan mode.
4.6.8 Priority Channel
The Priority Channel operates on Channel 16. Pressing the 16 key during
any operation except the Distress Call switches to the Priority Channel.
While using the Priority Channel, pressing the 16 key returns operation to
the Working Channel.