Filter
Top Products
4-56 Operation with Full Function Handset
4.7.4.2 Setting MMSI Number
This operation stores the MMSI number required for DSC
communications, including distress calls. You can request an MMSI
number when you apply for a radio license.
Notes:
• Regulations in some regions may not allow end users to program their
own MMSI number. If this unit was purchased to be used in such a
region, this function will e disabled and the programming must be done
by your Raymarine distributor.
• This is a one time operation. Once the MMSI number has been
programmed, you will not be able to change it.
• Until the MMSI number is programmed, all DSC functionality is disabled.
Pressing the INDV, ALL SHIP, and DISTRESS keys will only sound an
error alert.
1. Press the FUNC key followed by the MENU key to initiate the Menu
mode. Mn appears on the 7-segment display and NAVSTAT appears
on the dot matrix display.
2. Press the SQ UP/DOWN key to select SETTING.
3. Press the ENT key. The message SET appears on the 7-segment display
and MY MMSI appears on the dot matrix display.
ENT
4. Press the ENT key to submit. MS appears on the 7-segment display. If
the MMSI number has already been saved to the unit, the dot matrix
display scrolls the programmed MMSI number.
If the MMSI number has not yet been saved to the unit, the dot matrix
display scrolls PLEASE PROGRAM MMSI NO.
5. Press ENT. Nine underscore characters appear, which are placeholders
for the 9 digits of the MMSI number. The first character place to be
input is flashing.