Filter
Top Products
3-5
Operation with Minimum Function Handset
$
MON/ 1/25 Key
Pressing and releasing MON/1/25 initiates the Dual-Watch Monitor
mode.
Pressing and holding MON/1/25 for 2 seconds toggles the output
power between 1 and 25 watts. While in the 1 Watt mode, the 1W
indicator illuminates on the LCD.
In US mode only, pressing this key while holding PTT overrides the
1W output setting for channels 13 and 67.
%
16 Key
Pressing and releasing 16 switches the radio between the current
channel and the Priority Channel.
&
D/L
//
//
/ I.C. Key
Pressing and releasing D/L / I.C. switches receiver sensitivity between
Distant (full) and Local (desensitized) modes.
While in the Local mode, the DESENS indicator is illuminated.
Holding D/L / I.C. for 2 seconds toggles on and off the Intercom
function between the handset on the base station and an optional
remote Full Function Handset. Press PTT to converse with the other
station.
'
DSC/ PRI Key
Pressing and releasing the DSC/PRI key by itself has no effect.
Pressing and releasing the DSC/PRI and D/L / I.C. keys
simultaneously places the radio in DSC mode, which is used to make
Individual Ship’s, All Ships, Group, and Distress Calls.
Note: An optional Full Function Handset must be installed to enable
the Class “D” DSC functionality.
Pressing and holding DSC/PRI for 2 consecutive seconds returns
priority control from an optional second station Full Function Handset
to the base station. This feature is for immediately taking radio
operation control from the second station in case of an emergency.
DIM Key
Pressing this key once starts Dimmer mode, which adjusts the
brightness of LCD’s backlight.
Each successive press of the DIM key switches the brightness from
Off, to Low, to Medium, to High, then back to Off.