Filter
Top Products
3-27
Operation with Minimum Function Handset
Press the DSC/PRI key once and the radio automatically selects channel
16. There is no acknowledge required for an All Ships Call. If you do not
wish to accept the call, press the 16 key to exit the DSC mode.
PRESS & RELEASE
DSC
Receive All Ships Call:
Routine, Safety, or Urgency
Converse on channel 16
3.5.18.4 Group Call
The Group Call feature sends transmissions that are only received by
radios that share a common Group MMSI number.
The RAY215E requires a Full Function Handset to program in the Group
MMSI number. For this reason, the Minimum Function Handset can only
receive Group Calls. You must use the Full Function Handset to send a
Group Call.
If you are currently on a selected working channel or private channel, in
the Monitor mode, or in the Scan mode when a Group Call is received,
the radio automatically enters DSC mode, sounds an alarm, and displays
the type of call.
After receiving a Group Call, press and release the DSC key to accept the
call. The unit switches to the working channel and extinguishes the DSC
indicator, indicating the unit has exited the DSC mode.
The large channel display indicates the working channel and the small
channel display is extinguished. If you do not wish to acknowledge the
call, press the 16 key to exit the DSC mode.
PRESS & RELEASE
DSC
Receive Group Call
Call accepted. Converse on
selected Working Channel.