Filter
Top Products
23
Troubleshooting
If you still have problems, disconnect the TAD. If other phones on the same line work properly,
the fault is in this phone or its installation. If you cannot find the problem, take your phone to
your local RadioShack store for assistance.
CARE
To enjoy your phone for a long time:
• Keep the phone dry. If it gets wet, wipe it
dry immediately.
• Use and store the phone only in normal
temperature environments.
• Handle the phone gently and carefully.
Do not drop it.
• Keep the phone away from dust and dirt.
• Wipe the phone with a damp cloth occa-
sionally to keep it looking new.
Modifying or tampering with the phone’s in-
ternal components can cause a malfunction
and might invalidate its warranty and void
your FCC authorization to operate it. If your
phone is not performing as it should, take it
to your local RadioShack store for assis-
tance. If the trouble is affecting the telephone
lines, the phone company can ask you to dis-
connect your phone until you have resolved
the problem.
The handset stops working or
works poorly during a call (contin-
ued).
If the base loses power while the handset is away, the security
access-protection code might change. Restore power to the base,
then place the handset back on the base. The CHARGE/IN USE
indicator lights, indicating that the code is set again.
Check the charging contacts on the handset and base. If they are
dirty, clean them with a pencil eraser.
The TAD does not answer calls. Make sure the TAD is turned on.
Make sure the AC adapter is properly connected.
Check all phone line connections.
The TAD does not record callers’
messages.
REC
TIME
is set to
ANN
(announcement only). Set it to
1
or
4
.
Delete messages if memory is full.
Problem Suggestion
43-1130.fm Page 23 Tuesday, May 30, 2000 1:22 PM