Filter
Top Products
21
TAD Operation
To enter a remote command, press
#
and
(within 2 seconds) the number for the com-
mand you want.
Note:
The remote operation stops when
someone picks up the handset or any phone
on the same phone line.
Remote Commands
Press #
then
To
1
Repeat the current message during
playback.
2
Play messages.
3
Skip the current message during play-
back.
4
Delete the current message during
playback.
5
Stop playback, recording, or room
monitoring.
6
Set the TAD to answer calls.
7
Record or stop recording a memo.
8
Record or stop recording a new out-
going message.
9
Set the TAD to not answer calls.
Monitor the room where the TAD is
located.
43-1130.fm Page 21 Tuesday, May 30, 2000 1:22 PM