Filter
Top Products
6
PREPARATION
Select a location for the TAD-704 that is
near a modular telephone line jack and
an AC outlet, and is not in the way of
normal activities.
CONNECTING THE TAD
Notes:
• Your TAD-704 connects directly to a
modular telephone line jack. If your
phone line jack is not a modular
jack, you can update the wiring
yourself, using jacks and adapters
available at your local RadioShack
store. Or, you can let the phone
company update the wiring for you.
• The USOC number of the jack to be
installed is RJ11C.
Follow these steps to connect your TAD
to the telephone line and phone.
1. Unplug the telephone's modular
cord from the modular phone line
jack and plug it into the
PHONE
jack
on the back of the TAD.
2. Plug one end of the supplied modu-
lar cord into the
LINE
jack on the
back of the TAD.
3. Plug the cord's other end into a
modular phone line jack.
4. Insert the supplied AC adapter's
barrel plug into the AC 9V 400 mA
jack on the back of the TAD.
Cautions:
You must use a Class 2
power source that supplies
9V AC and delivers at least
400 mA. Its plug must fit the TAD-
704's
AC 9V 400 mA
jack. The sup-
plied adapter meets these specifica-
tions. Using an adapter that does
not meet these specifications could
damage the TAD-704 or the adapt-
er.
• Always connect the AC adapter to
the TAD-704 before you connect it
to AC power. When you finish, dis-
connect the adapter from AC power
before you disconnect it from the
TAD-704.
5. Plug the other end of the adapter
into a standard AC outlet.
!
43-704.fm Page 6 Wednesday, November 17, 1999 4:47 PM