Filter
Top Products
19
DELETING MESSAGES
To delete all the messages you have al-
ready played, while playback is
stopped, hold down
ANSWER/STOP/DE-
LETE
. The TAD-1028 sounds a long
beep then deletes all old messages, but
keeps any new messages (and the
PLAY/SKIP indicator continues flash-
ing).
Notes:
• Even if you have played only a
small portion of a message, the
TAD-1028 might delete it.
• Individual messages can only be
deleted by remote operation (see
“Remote Operation” on Page 21).
RECORDING A MEMO
A memo is a message you can record at
the TAD-1028, without having to call in
on a phone.
Notes
:
• The maximum memo length is 60
seconds.
• When memory is full, the TAD-
1028 announces, “Memory is full,”
and you cannot record the memo.
Delete old messages to make
room in memory (see “Deleting
Messages” on Page 19).
Follow these steps to record a memo.
1. Hold down
PLAY/SKIP
until the
TAD-1028 beeps.
2. Speak in a normal voice into the
microphone on the front of the
TAD.
3. The TAD-1028 automatically stops
recording after 60 seconds, or you
can press
ANSWER/STOP/DELETE
when you finish the memo. The
TAD-1028 beeps once.
The memo is recorded along with the in-
coming messages. To hear the memo,
simply play back your messages.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
The TAD’s remote operation security
code is preset to
788
. You can operate
your TAD-1028 remotely with this code;
however, we recommend that you set
your own code.
Notes
:
• Be sure to set each digit within 8
seconds. Otherwise, you must start
over from Step 1.
• If AC power fails and the backup
battery becomes weak, the remote
operation security code automati-
cally resets to 788.
43-788.fm Page 19 Monday, August 16, 1999 8:19 AM