Filter
Top Products
9
PREPARATION
SETTING THE DAY AND
TIME
The TAD records the day and time of the
call with each phone message. Follow
these steps to set the day and time.
Notes
:
• To avoid having to reset the day
and time if AC power is lost, we rec-
ommend you install a backup bat-
tery before you set the day and
time.
• If you do not press a button within 8
seconds at each step, the TAD
sounds a three-tone beep and
stops setting the day and time.
• The day and time are not set until
you complete Step 7.
1. Press and hold
SET
until the TAD
beeps. The TAD announces, “Sun-
day,” and
01
flashes on the display.
Note
: If necessary, adjust
VOLUME
at the right side of the TAD to the
desired listening level.
2. To change the day of the week,
within 8 seconds after releasing
SET
, repeatedly press
REPEAT
to
move backward or
SKIP
to move
forward until the TAD announces
the desired day of the week.
3. Press and release
STOP
. The TAD
beeps once and announces the
time format, “AM” or “PM.”
4. To change the hour, repeatedly
press
REPEAT
to move backward
or
SKIP
to move forward to the
desired hour.
5. Press and release
STOP
. The TAD
beeps once to confirm the hour set-
ting.
43-747.fm Page 9 Friday, August 13, 1999 2:22 PM