Filter
Top Products
12
BASIC OPERATION
SETTING THE TAD TO
ANSWER CALLS
To set the TAD to answer calls, press
ANSWER
.
• If an outgoing message is recorded,
the TAD announces, “Answer on,”
and the indicator in the call/mes-
sage counter window lights.
• If no outgoing message is recorded,
the TAD says, “Answer off, no
announcement.” (See “Recording
the Outgoing Message.”)
To have the TAD not answer calls, press
ANSWER
again. The TAD says “Answer
off,” and the indicator turns off.
RECORDING INCOMING
MESSAGES
After the TAD answers a call, the outgo-
ing message plays. After the TAD
beeps at the end of the announcement,
the caller must select a mailbox by en-
tering a number (1-4). The TAD an-
nounces, “Record Mailbox” and the
mailbox number. If the caller does not
select a mailbox, the recorded message
is left in Mailbox 1.
The maximum incoming message re-
cording length is 60 seconds. If a re-
cording reaches 55 seconds, the TAD
beeps once to notify the caller that time
will be up soon. If a recording reaches
60 seconds, the TAD beeps three times,
then disconnects.
The TAD automatically stops and hangs
up if it detects silence for over 8 sec-
onds.
If the memory is full, the TAD announc-
es, “Memory is full” and displays
FL
,
then disconnects.
43-747.fm Page 12 Friday, August 13, 1999 2:22 PM