Radio Shack TAD-1007 Answering Machine User Manual


 
20
Note: The TAD sounds a 3-tone beep if you press a wrong button.
After you press
41
,
42
,
43
, or
44
(to play all messages), or
51
,
52
,
53
, or
54
(to play new
messages), you can enter the following commands.
Press Command Function
5 1
5 2
5 3
5 4
Play New Messa
g
es in
a Specific Mailbox (To
see what commands
you can use at this
point, see the table
below)
Plays only new messa
g
es that have not already
been played. When new messa
g
es are recorded,
the TAD beeps, announces, “Mailbox __” and the
number of new messa
g
es, then plays them.
If there are no new messa
g
es, the TAD beeps and
says, “Mailbox (number), no new messa
g
e.”
6 1
6 2
6 3
6 4
Delete All Messa
g
es If some messa
g
es (but no new messa
g
es) are
recorded in a specific mailbox, the TAD sounds a
short beep then a lon
g
beep and deletes all mes-
sa
g
es in that mailbox.
If new messa
g
es are recorded, the TAD
announces, “New messa
g
es” but does not delete
all messa
g
es. If no messa
g
es are recorded, the
TAD beeps and announces, “No Messa
g
e.”
# Answer On/Off Sets the TAD to answer or not answer calls. The
TAD beeps and announces, “Answer on” or
“Answer off.”
Press Command Function
6 Delete Deletes the current messa
g
e.
7 Replay Previous Replays the previous messa
g
e.
8 Replay Replays the current messa
g
e.
9 Skip Skips forward to the next messa
g
e.
0 Stop Stops messa
g
e playback.
43-747.fm Page 20 Friday, August 13, 1999 2:22 PM