Filter
Top Products
8
2. Snap the battery’s terminals to the
connector inside the compartment.
Then place the battery inside.
3. Replace the cover
When
Lo
and the number of calls in
memory alternately flash on the display,
replace the battery. Be sure the AC
adapter’s cord is plugged in so you do
not lose the TAD’s stored information.
USING RESET
If the TAD does not work, press
RESET
on the back of the TAD to reset the an-
swering machine.
Note
: The outgoing message and all in-
formation stored in memory are deleted
when you press
RESET
.
43-747.fm Page 8 Friday, August 13, 1999 2:22 PM