Filter
Top Products
8
4. Position the mounting bracket with
the narrow end on top. Route the
short modular cord through the cen-
ter hole of the bracket, and insert
the two tabs at the top of bracket
into the matching slots on the base’s
back, near the jacks.
Press the two tabs at the bottom of
the bracket into the matching slots
on the back of the base to lock the
bracket into place.
5. Plug the modular cord’s other end
into the wall plate’s modular phone
line jack.
6. Align the keyhole slots on the
bracket with the studs on the wall
plate, then slide the base downward
to secure it.
7. Plug the AC adapter into a standard
AC outlet.
8. For the best
reception, adjust
the base’s anten-
na so it stands
straight up.
illus -- show modular
cord already connected
43-1098.fm Page 8 Tuesday, August 17, 1999 4:03 PM