Filter
Top Products
17
Note: If you do not have any special
phone services, pressing
FLASH
might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these services.
With
T/P
set to
P
, just press when
you want to begin sending tones. Any
additional numbers you dial are sent as
tone signals. When you hang up, the
phone automatically resets to the pulse
mode.
CHANGING CHANNELS
The ET-928 continuously scans chan-
nels (frequency pairs used between the
base and the handset) and automatical-
ly selects a clear one each time you
make or receive a call using the hand-
set.
If you notice interference during a call,
however, you can repeatedly press
IN-
TCM
on the handset to try to find a clear-
er channel. The ET-928 changes to a
different channel each time you press
INTCM
.
Note: You cannot change the channel
while using
HOLD
.
43-1098.fm Page 17 Tuesday, August 17, 1999 4:03 PM