Filter
Top Products
15
PUTTING A CALL ON
HOLD
Press HOLD to put a call on hold so you
can use the other phone line without dis-
connecting the current call. The line indi-
cator flashes when a call on that line is
on hold.
Note:
Do not return the handset to the
base while a call is on hold. Placing the
handset on the base after you press
HOLD disconnects the call.
To release a line from hold and continue
your conversation, press that line’s but-
ton.
Note
: If you do not pick up the call again
within 3 minutes after putting it on hold,
the phone disconnects the call.
You can alternate between the two lines
by pressing
HOLD then the button for the
desired line.
Note:
If you press the other line’s button
without first pressing
HOLD, the first call
is disconnected.
CONFERENCE CALLING
Follow these steps to have a 3-way con-
ference call.
1. Place the first call on hold.
2. Make or answer a call on the other
line.
3. Press
CONF. Both line indicators
briefly flash then light steadily. All
three parties are connected.
Note
: During conference calls, some
long-distance calls might sound weaker
than local calls.
To talk on only one line without discon-
necting the other line, press
HOLD to put
both lines on hold. Then press the but-
ton for the line you want to talk on.
To return to a three-way conversation,
press
CONF.
To end the conference call, press
CONF
or return the handset to the base.
To hang up one line and continue talking
on the other, press the line button for the
line you want to keep using.
43-689.fm Page 15 Thursday, September 16, 1999 10:22 AM