Filter
Top Products
7
2. Route the short cord downward
through the slot on the base’s bot-
tom and under the clips as shown.
3. Route the other end of the short
cord through the hole in the
bracket’s center.
4. Attach the supplied bracket to the
bottom of the base by inserting
the tabs on the bracket into the
slots on the base, then sliding the
bracket up.
5. Insert the supplied AC adapter’s
barrel plug into the
12VDC
jack on
the back of the base. Then plug
the adapter into a standard AC
outlet.
6. Plug the modular cord into the
wall plate’s jack.
7. Align the bracket’s keyhole slots
with the wall plate studs and slide
the base downward to secure it.
43-1046.fm Page 7 Tuesday, August 17, 1999 11:05 AM