Filter
Top Products
15
MEMORY DIALING
You can store up to 10 phone numbers
for single-button dialing. Each stored
number can be up to 16 digits long.
Notes:
•If
TONE/PULSE
is set to
PULSE
and you want to use tone dialing
for a memory number, you must
store the tone entry along with the
number.
• To keep your accounts secure, we
recommend you
not
store your
personal access code for services
such as bank-by-phone in a mem-
ory location.
Storing a Number in Memory
1. If necessary, press
TALK
on the
handset so the IN USE indicator
turns off.
2. Press
MEMORY
.
Note:
While you are storing a
number in memory, if you do not
press any button within 10 sec-
onds, you must repeat Step 2 and
try again.
3. Dial the number you want to store.
4. Press
MEMORY
again.
5. Press the memory location num-
ber (0 to 9) where you want to
store the number. A long beep
sounds. The phone number is
now stored in memory.
6. Remove the plastic covering from
the handset’s index card with a
small pointed object, such as the
end of a straightened paper clip.
Write the person’s or company’s
name and memory location num-
ber on the card in pencil (in case
you want to change it later).
7. Repeat Steps 2-6 to store and
record other telephone numbers.
Notes:
• If you receive a call while you are
storing a number in memory,
press
TALK
to answer the call.
After the call, begin again at Step
1 to store the number.
• To change a number stored in
memory, simply store a new num-
ber in that memory location.
43-1046.fm Page 15 Tuesday, August 17, 1999 11:05 AM