Radio Shack ET-546 Cordless Telephone User Manual


 
5
PREPARATION
CONNECTING THE
BATTERY
Before you use your phone for the first
time, you must connect the battery,
then charge it for about 12-15 hours.
Slide off the battery compartment cov-
er on the back of the handset. Connect
the battery to the pins inside the bat-
tery compartment.
Then replace the cover, install the
handset’s antenna, mount the phone
(see “Selecting a Location”), and follow
the instructions under “Charging the
Battery.”
INSTALLING THE
HANDSET’S ANTENNA
Insert the antenna into the hole at the
top of the handset, then rotate the an-
tenna clockwise until it is secure.
SELECTING A LOCATION
You can place your phone on a desk,
shelf, or table, or mount it on a wall.
Select a location that is:
Near an AC outlet
Near a telephone line jack
Out of the way of normal activities
Away from fluorescent lights, elec-
trical machinery, electrical appli-
ances, and metal walls or filing
cabinets
Away from computers, remote
control toys, wireless intercoms,
alarms, and room monitors
The base’s location affects the phone’s
range. If you have a choice of several
locations, try each to see which pro-
vides the best performance.
Notes:
If the phone line jack is not a mod-
ular jack, you must update the wir-
ing. You can do this yourself,
using jacks and adapters avail-
able at your local Radio Shack
store, or you can let the phone
company update the wiring for
you.
The phone company will charge
you for the installation of the nec-
essary jacks.
43-1046.fm Page 5 Tuesday, August 17, 1999 11:05 AM