Filter
Top Products
9
5. Insert the supplied AC adapter’s
barrel plug into the
12V DC
jack on
the back of the base. Then route
the adapter’s cord through the
right slot on the base’s bottom and
under the clips. Plug the adapter
into a standard AC outlet.
6. Plug the modular cord into a mod-
ular phone line jack.
7. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
8. Press and lift out the handset
holder. Rotate the holder 180
°
as
shown, and then snap it back into
place so it holds the handset.
Note:
If you later want to mount the
base on a desktop, press
PUSH
and
slide the bracket down to remove it
from the base’s bottom.
43-1018.fm Page 9 Tuesday, August 17, 1999 8:53 AM