Filter
Top Products
16
At the appropriate place in the number,
press
REDIAL
to enter a 2-second
pause. For a longer pause, press
RE-
DIAL
again (each press enters a 2-sec-
ond pause).
Dialing a Stored Number
Follow these steps to dial a number
stored in memory.
1. Lift the handset from the cradle or
press
TALK
so the TALK indicator
lights.
2. When you hear a dial tone, press
MEMO
, then press the correct
memory location button. The
phone dials the stored number.
Storing/Chain Dialing Special
Service Numbers
When storing numbers for special ser-
vices (such as alternate long distance
or bank by phone services), store the
service’s main phone number in one
memory location and numbers for ad-
ditional information in other locations.
Follow these steps to chain-dial mem-
ory numbers.
1. With the handset’s
POWER
set to
ON
and TALK lit, press
MEMO
and
the memory-location number for
the service’s main number.
2. Wait for the service to answer.
Note:
If you use pulse dialing to
dial the service, after the service
answers, press
TONE
before pro-
ceeding with the next step.
3. Press
MEMO
and the memory-
location numbers for the addi-
tional information.
4. To disconnect the call, press
TALK
so the TALK indicator turns off.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire de-
partment, ambulance) and you choose
to test the stored number, remain on
the line to explain the reason for your
call. Make the test call during the late
evening or early morning hours to
avoid peak demand periods.
43-1018.fm Page 16 Tuesday, August 17, 1999 8:53 AM