Filter
Top Products
8
Mounting the Base Directly
on the Wall
You need two wood screws (not sup-
plied) for this mounting method.
1. Drill two holes 3
15
/
16
inches apart.
Then thread a screw into each
hole, letting the heads extend
1
/
4
inch from the wall.
2. Plug one end of the supplied mod-
ular cord into the
PHONE
jack on
the back of the base.
3. On the bottom of the base, route
the modular cord downward and
under the left slot’s clips as
shown.
4. To attach the supplied bracket to
the bottom of the base, insert the
tabs on the bracket into the slots
on the base, then slide the bracket
up.
43-1018.fm Page 8 Tuesday, August 17, 1999 8:53 AM