Filter
Top Products
22
Memory Dialing
ENTERING A PAUSE IN A MEMORY
NUMBER
In some telephone systems, you must dial an access code (9,
for example) and wait for a second dial tone before you can dial
an outside number. You can store the access code with the
phone number. However, if you do, you should also store a
pause after the access code to allow the outside line time to
connect. After entering the access code, press
REDIAL
to enter
a 3-second pause.
DIALING A STORED NUMBER
Press
TALK
. When you hear the dial tone, press
MEMORY
then
the memory location number (
1
–
0
). The memory location num-
ber (
01
–
10
) appears. The phone dials the number.
Note:
To dial the number in the 10th memory location, press
0
.
To pre-dial the stored number, press
MEMORY
then
8
88
8
or
9
99
9
to
find the desired number. Then press
DIAL
.
REVIEWING NUMBERS STORED IN
MEMORY
1. Press
MEMORY
.
2. Press
8
88
8
or
9
99
9
to scroll through 10 memory location num-
ber, or enter the memory location number on the keypad (
0
,
1
,
2
, and so on) to display the stored number.
43-2101.fm Page 22 Wednesday, February 23, 2000 9:12 AM