Filter
Top Products
21
Memory Dialing
4. Enter the name (up to 15 characters) using the following
table:
Note:
If you must enter two consecutive letters using the
same number key, press
FUNC
between the letters. For
example, for “Bob Jones,” enter
22 666 22 1 5 666 FUNC 66
33 7777
.
5. Press
MEMORY
again.
ENTER
TEL
NUMBR
appears.
6. Dial the desired number (up to 24 digits).
7. Press
MEMORY
again to store the number. The keypad
sounds two long beeps.
Note:
If you hear three short beeps, you did not store the
number successfully. Start again from Step 1.
8. Slide out the memory index card at the bottom of the base
and write down the stored name and number.
Note:
If LOW BATTERY appears, or if the keypad beeps while
you are on the phone, recharge or replace the battery within two
minutes, or the numbers stored in memory will be lost.
# Presses 1 2 3 4 5 6 7 8 9
1ADGJMPTW
2 –BEHKNQUX
3
∗
CF I LORVY
4!()$,;S?Z
43-2101.fm Page 21 Wednesday, February 23, 2000 9:12 AM