Radio Shack ET-2101 Cordless Telephone User Manual


 
11
Preparation
4. Plug the adapter into a standard AC outlet.
5. Lift the base’s antenna to a vertical position.
CONNECTING AND CHARGING THE
BATTERY PACK
The phone comes with a rechargeable nickel-cadmium battery
pack. You must connect the battery pack and charge it for at
least 12 hours for the first time before you use the phone.
To connect the battery pack, line up
the slots on the battery pack with the
posts on the back of the keypad.
Press down and slide the battery pack
forward until the latch clicks.
To charge the battery pack, place the keypad in the base’s front
charging slot. The STATUS/MESSAGE indicator lights.
To charge a spare battery pack,
place it in the rear charging slot
with its latch end facing down
and its contacts toward the rear
of the base. The CHARGE indi-
cator lights.
Spare battery packs are avail-
able at your local RadioShack
store.
STATUS/
MESSAGE
Charging
Slots
CHARGE
43-2101.fm Page 11 Wednesday, February 23, 2000 9:12 AM