Filter
Top Products
17
To page the base from the handset,
press
INTCM
. Paging Base appears,
and the base and handset ring. Press
SPEAKER
or
INTERCOM
on the base to
answer the page.
Intercom appears
on the handset’s display.
To page the handset from the base,
press
INTERCOM
. The handset and
base ring, and
Paging appears on the
handset’s display. Press
TALK
or
INTCM
on the handset to answer the page. In-
tercom
appears.
To end an intercom call, press
TALK
on
the handset, press
SPEAKER
on the
base, or hang up the handset.
If a call comes in during an intercom
conversation, either the person at the
base or the person at the handset can
answer the call. Press
TALK
on the
handset or
SPEAKER
on the base once
to end the intercom call, then press
TALK
or
SPEAKER
again to answer the
incoming call.
Note:
The intercom does not operate if
the party being paged is already on a
call.
Transferring a Call between the
Handset and Base
You can use the ET-1118’s intercom
feature to transfer a call between the
handset and the base.
To transfer a call from the handset to the
base, press
INTCM
. The call is put on
hold, and
Paging Base and Hold ap-
pear. When the person at the base an-
swers, press
TALK
. The call is released
from hold and transferred to the base.
To return to handset use, press
TALK
again.
To transfer a call from the base to the
handset, press
INTERCOM
. The call is
put on hold, and
Paging and Hold ap-
pear on the handset’s display. When the
person with the handset answers, press
SPEAKER
. The call is released from hold
and transferred to the handset. To return
to base use, press
SPEAKER
again.
MEMORY DIALING
You can store up to 20 numbers in
memory (10 each in the handset’s and
base’s memory), then dial a stored num-
ber by pressing a memory location num-
ber. You can also store a name with
each number in the handset’s memory.
SPEAKER
INTERCOM