Filter
Top Products
12
At any time except during a call, press
or to set the handset’s ringer vol-
ume. The phone rings at the selected
volume and the display shows
Ringer
Low
or Ringer High.
To set the base’s ringer volume, set
RING VOL
on the back of the base to
OFF
,
LO
, or
HI
. When you set
RING VOL
to
OFF
, the base (and the handset if it is
on the base) does not ring but the other
phone connected to the same line rings.
If the handset is away from the base, the
handset also rings.
Note:
When you set the auto talk func-
tion to off, the handset rings when you
lift the handset from the base. See “Us-
ing Auto Talk.”
USING AUTO TALK
Your phone is preset so you must press
TALK
when you lift the handset from the
base to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base or by
pressing any key when the handset is
away from the base.
Follow these steps to turn auto talk on or
off.
1. Lift the handset then hold down
CALL ID
. A menu appears with
Auto Talk selected.
2. Press
SELECT
to change the auto
talk setting.
On or Off appears
indicating the selected setting.
3. To clear the display, press
CALL ID
or return the handset to the base.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you have Call Waiting with Caller ID
service, you can set the ET-1118 to
show Caller ID information for an incom-
ing call even while you are already on
the phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset then hold down
CALL ID
.
2. Press
2
or to select CIDCW
(Caller ID/Call Waiting).
RING VOL
CALL ID
SELECT