Filter
Top Products
20
Operation
Adding/Deleting the Area Code
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 13), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code. When the record is on the display,
press
3
to add or delete the area code.
Pressing
3
again deletes or adds the area
code.
When you dial the number or store it into
memory, the phone dials or stores the num-
ber as it appears.
Dialing Numbers from
a Caller ID Record
To dial a local number stored in a Caller ID
record, recall the record, then press
TALK
. If
it is a long distance call, press
1
(
1
appears
before the displayed number) before you
press
TALK
. If you want to add or delete the
area code, press
3
before you press
TALK
.
Note:
If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example) you cannot dial from that
record.
Storing a Caller ID
Record to Memory
Follow these steps to store the name and
number from a Caller ID record into a memo-
ry location.
1. Press
CALL
ID
then
VOL/CID
8
88
8
or
9
99
9
to
recall the record you want to store.
2. If you want to add or delete the area
code, press
3
. If it is a long distance call,
press
1
.
3. Press
MEM
.
Select
Location
appears.
4. Choose a memory location (
01–20
) by
pressing a number or by repeatedly
pressing
VOL/CID
8
88
8
or
9
99
9
, then press
SELECT/CHANNEL
.
If the selected location is empty, the phone
beeps to confirm that it stored the number,
then the Caller ID record appears.
If a record exists in the selected location,
Replace
Memory?
appears, prompting
you to confirm the replacement. Move the
cursor to
Yes
or
No
, then press
SELECT/
CHANNEL
.
Deleting Caller ID Records
You can delete Caller ID records individually
or all at once.
Follow these steps to delete a single Caller
ID record.
1. Press
CALL
ID
then
VOL/CID
8
88
8
or
9
99
9
to
recall the record you want to delete.
2. Press
DEL
.
Delete
Message?
and
Yes
/
No
appear with the cursor pointing
to
Yes
.
3. Press
SELECT/CHANNEL
or
DEL
. The
phone beeps once.
Unknown
Name
or
Unknown
Number
The caller is not within a
Caller ID service area.
Incomplete
Data
Appears if there was an
error during transmission of
Caller ID information. Occa-
sional errors are normal. If
the phone frequently dis-
plays
Incomplete
Data
, contact your local
telephone company or
RadioShack store.
Display Description
43-5520.fm Page 20 Friday, July 21, 2000 8:01 AM