Filter
Top Products
21
Caller ID Operation
Caller ID Messages
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 13), the Caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
3
to add or delete the area
code. Pressing
3
again deletes or adds the
area code.
When you dial the number or store it into
memory, the phone dials or stores the num-
ber as it appears on the display.
DIALING NUMBERS FROM
CALLER ID RECORDS
1. Press
CID
, then
VOL/CID
8
88
8
or
9
99
9
to
recall the record.
If it is a long distance call, press
1
(
'
''
'
appears before the displayed number)
before you press
TALK
.
If you want to add or delete the area
code, press
3
before you press
TALK
.
2. Press
TALK
.
Note:
If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example), you cannot dial from that
record.
STORING A CALLER ID
NUMBER IN MEMORY
1. Press
CID
, then
VOL/CID
8
88
8
or
9
99
9
to
recall the record you want to store.
If it is a long distance number, press
1
.
If you want to add or delete the area
code, press
3
.
2. Press
MEM
.
I[b[YjýBeYWj_ed
I[b[YjýBeYWj_edI[b[YjýBeYWj_ed
I[b[YjýBeYWj_ed
appears.
3. Choose a memory location (01–20) by
pressing a number or by repeatedly
pressing
VOL/CID
8
88
8
or
9
99
9
.
4. Press
SELECT
.
If the selected location is empty, the TAD
beeps to confirm that it stored the num-
ber, then the Caller ID record appears.
If a record exists in the selected loca-
tion,
H[fbWY[ý C[ceho5
H[fbWY[ý C[ceho5H[fbWY[ý C[ceho5
H[fbWY[ý C[ceho5
appears, prompt-
ing you to confirm the replacement.
Move the cursor to
O[ i
O[ iO[i
O[ i
or
De
DeDe
De
, then press
SELECT
.
DELETING CALLER ID
RECORDS
You can delete Caller ID records individually
or all at once.
Display Description
D[m0ýN
D[m0ýND[m0ýN
D[m0ýNN
NN
N
J
JJ
JejWb0ýNN
ejWb0ýNNejWb0ýNN
ejWb0ýNN
Shows the number of
new Caller ID records
(records you have not
reviewed) and the total
number of records.
Fh_lWj[ýDWc[
Fh_lWj[ýDWc[Fh_lWj[ýDWc[
Fh_lWj[ýDWc[
or
ý
ýý
ý
Fh_lWj[ýDkcX[h
Fh_lWj[ýDkcX[hFh_lWj[ýDkcX[h
Fh_lWj[ýDkcX[h
The caller has blocked
the Caller ID information.
KdademdýDWc[ý
KdademdýDWc[ýKdademdýDWc[ý
KdademdýDWc[ý
or
ý
ýý
ý
Kdadem dýDkcX[h
Kdadem dýDkcX[hKdadem dýDkcX[h
Kdadem dýDkcX[h
The caller is not within a
Caller ID service area.
?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW
Appears if there was an
error during the transmis-
sion of Caller ID informa-
tion. Occasional errors
are normal. If the phone
frequently displays
?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW
, contact
your local telephone com-
pany or RadioShack
store.