Filter
Top Products
6
Telephone Setup
Battery Installation and Charging
Install the battery as shown below. After installing the battery, you might
be able to make and receive short calls. For best performance, charge the
handset for at least 16 hours before use. When not in use, place the handset
in the telephone base or charger. See page 38 for battery operating times.
Press the indentation and slide to remove the battery cover.
Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires
inside the battery compartment.
Align the cover flat against the battery compartment, then slide it
towards the center of the handset until it clicks into place.
Charge the handset by placing it in the
telephone base or charger. The CHARGE
light is on when the handset charges.
1.
2.
3.
4.
5.
Match color
code
Red wire
Black wire
CHARGE
light