Filter
Top Products
14
Telephone Setup
voicemail while away from home). Clearing the voicemail waiting indicator
only turns off the indicators; it does not delete your voicemail messages. As
long as you have new voicemail messages, your local telephone company
continues to send the signal to turn on the indicators.
To manually turn off these indicators:
Press MENU/SELECT to show the menu.
Press or to select >CLR VOICEMAIL, then press
MENU/SELECT. The screen shows TURN OFF
INDICATOR? PRESS SELECT TO CONFIRM.
Press MENU/SELECT to confirm your selection.
n Notes:
Your telephone service provider might alert you
to new messages with a stutter (broken) dial tone.
Contact your service provider for details.
Voicemail is different from answering system messages recorded in your
answering system.
Home Area Code
If you dial your local calls using only seven digits (area code not required),
you can program your home area code so that when you receive a call
within your local area, the telephone number is automatically stored without
the area code in the call log.
Press MENU/SELECT to show the menu.
Press or to select >HOME AREA CODE, then press
MENU/SELECT. The stored home area code appears
with the last digit flashing.
Use the dialing keys to enter the desired home
area code.
Press MUTE/REMOVE to delete a digit.
Press and hold MUTE/REMOVE to delete the
entire entry.
4. Press MENU/SELECT to confirm.
n Note: If, in the future, your telephone company requires you to dial
the area code when making a local call, or, if you move to a location that
requires it, delete the home area code you have already programmed,
following the steps above. After you have deleted the home area
code, _ _ _ will appear in the display.
1.
2.
3.
•
•
1.
2.
3.
•
•
RINGER TONE
KEY TONE
LCD LANGUAGE
SET DATE/TIME
>CLR VOICEMAIL
RINGER TONE
KEY TONE
LCD LANGUAGE
SET DATE/TIME
>CLR VOICEMAIL
TURN OFF
INDICATOR?
PRESS SELECT
TO CONFIRM
TURN OFF
INDICATOR?
PRESS SELECT
TO CONFIRM
KEY TONE
LCD LANGUAGE
SET DATE/TIME
CLR VOICEMAIL
>HOME AREA CODE
KEY TONE
LCD LANGUAGE
SET DATE/TIME
CLR VOICEMAIL
>HOME AREA CODE
HOME AREA CODE
817
HOME AREA CODE
817