Filter
Top Products
Expanding Your Phone
46
4-WAY CONFERENCING
Fourth person, at either the handset or the
base, may be added to the conference call.
For example, to add a fourth party to an
ongoing conference call at the base or
another handset, press
TALK/FLASH on the
fourth party’s handset (or
SPEAKER on the
base). To remove either caller from your
conversation, press
END on the party’s
handset (or
SPEAKER on the base). The
other parties will still be connected to the
call.
INTERCOM/CALL TRANSFER
F
EATURE
Intercom and Call Transfer features are
available for your phone. Ô
Intercom
From handset to handset or to the base
1. Press
HOLD/TRSF/INTCM in standby
mode.
2. Select the base or the handset you
want to talk with from the selection list
within 30 seconds. To select the
handset (or the base), press
VOL/RING/ or VOL/RING/ , and then
press SELECT/ . If you select All, all
handsets and the base will be paged.
An intercom tone sounds.
3. On the receiving handset (or the base),
to answer the call, press TALK/FLASH
or HOLD/TRSF/INTCM (or INTCM/PAGE
or SPEAKER on the base). Or press any
number key, /tone/< or #/> (when Any
Key Answer is on), or pick up the
handset from the cradle (when AutoTalk
is on).
Ô NOTES Ô
• If the party is busy or out
of range, the handset
returns to standby mode.
• If any of the following
occurs while selecting
the other handset (or the
base), the operation will
be canceled.
-Press TALK/FLASH
or SPEAKER.
-Receive an outside/
intercom call or page.
• When the party does not
answer within one
minute, the operation is
canceled.
• Standby Mode -
The handset is not in
use and TALK/FLASH
has not been pressed.