Filter
Top Products
Caller ID
42
4. Press
SELECT/ . You will hear a
confirmation tone.
USING THE CALLER ID
MESSAGE LIST
Calling a party from the Caller ID
list Ô
From Standby mode
1. When the phone is in standby mode,
view the Caller ID message (see
“Viewing the Caller ID List” on page 40).
2. Press TALK/FLASH or SPEAKER. The
displayed phone number dials
automatically.
From Talk mode
1. Press TALK/FLASH or SPEAKER.
2. View the Caller ID message you want
to dial (see “Viewing the Caller ID List”
on page 40).
3. Press
SELECT/ . The displayed
phone number will be dialed.
Long Distance calls and Area Code
Setting/Cancellation Ô
While the present Caller ID information is
displayed, pressing /tone/< will place or
remove the prefix “1” in the display to set the
call for a long distance call, or pressing
#/> will
set or cancel an area code (see page 23).
Storing Caller ID messages in the
Phonebook Ô
Messages shown in the Caller ID list can be
stored in the phonebook. The phone
number and name of the party on the Caller
ID list can be stored in memory.
Ô NOTES Ô
• You cannot make a call
from the Caller ID list if
your phone is connected
to a private branch
exchange (PBX).
• When a long distance
call has been set,
1
appears in the display.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information is
stored.
• If the Caller ID message
was received as a
private/unknown
number, or the message
does not have the
number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored
as <No Name>.
• Even if the 100 memory
locations are full, the
message will be stored
in the Phonebook.
However, the message
will be erased from the
Caller ID list.