Setting Menu Options
24
2. Press the number keypad (
0-9) to enter
a 3-digit area code.
3. Press
SELECT/ . You will hear a
confirmation tone.
Setting the Dial Mode
1. Enter the Global Setup menu, and then
the Dial Mode submenu (see “Entering
the Menu” on page 17).
2. Press VOL/RING/ or VOL/RING/ to
select Tone or Pulse (the initial
setting is Tone).
3. Press
SELECT/ . You will hear a
confirmation tone.
Copy Phonebook
1. Enter the Global Setup menu, and then
the Copy Phonebook submenu (see
“Entering the Menu” on page 17). Ô
2. Press
VOL/RING/ or VOL/RING/ to
choose
One memory or All Memory,
and then press SELECT/ .
If you choose
All Memory, go to step 4.
3. Press
VOL/RING/ or VOL/RING/ , or
the number keypad (
0-9) to select the
phonebook location you want to export
and then press SELECT/ .
4. Press
VOL/RING/ or VOL/RING/ to
select the handset to which you want
transfer the phonebook locations, and
then press
SELECT/ .
If you choose
All Memory in the step
2, Are you sure? appears.
Press VOL/RING/ or VOL/RING/ to
select
Yes, and then press SELECT/ .
Ô NOTES Ô
• If you receive a call , the
transfer will be canceled.
• If an error occurs, the
phonebook locations
transferred before the
error were stored in the
receiving handset.
Unavailable appears
on the display.
• When the memory of the
receiving handset is full,
Not enough memory
in Receiving
Handset
appears. You
cannot transfer the
phone book location.