Filter
Top Products
12
Installation
3. Press
SELECT/CHANNEL
to change the
Caller ID/Call Waiting setting.
On
or
Off
appears.
4. Return the handset to the base to store
the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the
phone's Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store it in the memory),
you can add it afterwards. See “Adding/De-
leting the Area Code” on Page 20.
Note:
If your calling area requires 10-digit di-
aling including area code, do not enter the
area code but leave this option blank.
Follow these steps to store your area code.
1. Lift the handset and hold down
CID
.
2. Press
3
or
VOL/CID
9
twice to select
Area
Code
.
3. Press
SELECT/CHANNEL
, then enter
your three-digit area code. If you make a
mistake, repeatedly press
6
/
*
or
#
/
7
to move the cursor over the incorrect
digit, then enter the correct number.
Note:
If an area code is already stored,
it appears on the display. To delete the
area code, press
DEL
three times, then
enter your area code.
4. Press
SELECT/CHANNEL
to store the
area code, then press
CID
or return the
handset to the base to store the new
setting.
43-5521.fm Page 12 Monday, June 5, 2000 12:29 PM