Filter
Top Products
Basics
16
press
DELETE/FLASH to accept the waiting
call. There is a short pause, then you will
hear the new caller.
To return to the original caller, press
DELETE/FLASH again. Ô
USING THE SPEAKERPHONE
You may use the phone as a speakerphone
to answer calls by pressing the
line 1 or line
2 button on the base. To hang up, press line
1 or line 2 again.
The base microphone is located under the
phone. Position yourself as near to the base
as possible and speak clearly.
If the handset is on the base, you may use
either the base keypad or memory dialing to
place a call.
ANSWERING A CALL FROM
THE BASE
1. The base rings. The corresponding
line 1 LED on the base flashes.
2. Press
line 1 and speak.
3. When you finish the call, press
line 1 to
hang up.
ANSWERING A CALL FROM
THE HANDSET
1. The handset rings and ((
((
CC
CC
aa
aa
ll
ll
ll
ll
))
))
LL
LL
ii
ii
nn
nn
ee
ee
11
11
appears.
2. Press
line 1 to answer your call. Ô
3. When you finish the call, press
line 1 on
the handset, or return the handset to
the base.
Ô NOTE Ô
Flash and Call Waiting
• The flash feature does
not function when line 1
and line 2 are on a
conference call. (See “3-
Way Conferencing” and
“4-Way Conferencing”,
pages 19 and 20).
• You must subscribe
through your local
telephone company to
receive Call Waiting
Service.
Answering a Call from the
Handset
If you set the handset to
Auto Talk On, and the
handset is on the base, just
pick up the handset and
speak.
Each line setting is
independent for this
feature.
43-3701.fm Page 16 Thursday, April 24, 2003 11:56 AM