Filter
Top Products
20
Direct Call Operation
SETTING HOME ID
Home ID data allows you to enter the
ID number that will appear on the
receiving radio as you communicate
with it. You can select Home ID
numbers 1–16.
1. Set the transmitter and receiver to
the same channel (and same quiet
code, if you select one)
2. Hold down
FUNC and press CALL
to enter Setting Home ID mode.
Release all keys and then press
or to select your desired
Home ID number.
3. Press
PTT to store the setting. Ô
SETTING DIRECT CALL
Direct Call data allows you to enter the
receiver’s radio ID number that you
want to call. The radio’s receiver only
receives the Call when the Direct Call
data is matched with it’s Home ID. You
can select Direct Call number 1–16 or
Group Call. Ô
1. Hold down
CALL until the Call ID
number flashes on the display,
press or to select the
receiver’s home ID number or
Group option. (If you select
Ô NOTE Ô
• If you do not press a
key within 20
seconds when
setting the Home ID,
the radio
automatically exits
Home ID without
saving your settings.
•IfHomeIDis
changed, the radio
automatically resets
the Direct Call
number to Group
Call.
• If you press or
d
to change the
Direct Call number
and the number is
equal to the Home
ID. Then the next
Direct Call number in
order will appear to
prevent any conflict
of Home ID and
Direct Call.